Hatt Adventures Contact us

DMM Brass Offsets


Brass Offsets are crucial for protecting small flared cracks, often fitting perfectly where nothing else will go. The brass used for the head of the nut is soft enough to bite into placements, but hard enough to resist deforming and pulling through. Wires are soldered directly into the nut head, allowing a thicker wire to be used and increasing overall strength. The colour coded swage gives easy size selection and allows the Brass Offset to self equalise when loaded, making the most of marginal placements.

Out of stock

Please contact us for more information


  • Micro protection for small cracks. Having these wires on your rack gives you more options.
  • Asymmetrical taper gives stable placements in offset cracks. Use in combination with normal nuts to find security in almost any crack.
  • Wires soldered directly into heads for strength
  • Brass nuts are made from a special blend of brass and silicone that is soft enough to bite into placements, but hard enough to resist pulling through them. This helps them make the most of marginal placements.
  • Colour coded for easy size identification
  • Passive protection works in wet and icy conditions. Unlike active protection such as cams, passive protection can be used in wet or icy cracks, where friction is reduced.


  • Weight: 85g
  • Strength: 2-10kN
  • Weight: 85g
  • Range: 3.7-13.9mm
  • Certification: EN 12276:2013

Additional information

Weight 85 g



You may also like…